Planning and Configuring HP DCE 1.8

92 Chapter5
Configuring HP DCE Cells
Configuring Cells Using dce_config
dce_config asks for the name of a node with which it can synchronize
the clock on this node: Enter < RETURN> to get the default (the
master security machine in the cell).
Enter a machine to synchronize with:
(sec_server_node) <RETURN>
Time on host is within specified tolerance (120 secs) of
time on sec_server_node.
S:****** Checking for active sec_client service...
S:****** Starting sec_client service...
S:****** This node is now a security client.S:******
Starting cdsadv...
7. Enter the name of the cell CDS server. If the cell has more than one
CDS server, choose one:
What is the name of a CDS server in this cell (if there is
more than one, enter the name of the server to be cached if
necessary)? cds_server_host
Create LAN profile so clients and servers can be divided
into profile groups for higher performance in a multi-lan
cell? (n) n
S:****** This node is now a CDS client.
8. After configuring the CDS client, dce_config asks how the node
should be configured for DTS. If you are using DTS as your time
synchronization mechanism, you must configure a DTS clerk (client)
on any system that is not running a DTS server.
Should this machine be configured as a DTS Clerk, DTS Local
Server, or DTS Global Server? (default is DTS Clerk) (clerk,
local, global, none) <RETURN>
S:****** Starting dtsd...
S:****** This node is now a DTS clerk
Configuration of the Security, CDS and DTS client system is now
complete.
Configuring GDA Servers
The DCE Global Directory Agent (GDA) facilitates communication
between DCE cells. This section describes how to start the GDA server.
Before you start a GDA server, see "Establishing Intercell
Communication" in Chapter 7 for information about establishing