Planning and Configuring HP DCE 1.8

Chapter 5 89
Configuring HP DCE Cells
Configuring Cells Using dce_config
appears:
Enter the device name where the TP is connected:
You have now completed configuration of the server systems.
Configuring Additional CDS Servers
Follow this procedure if you want to configure additional CDS servers:
1. From the DCE Configuration Menu, choose Additional Server
Configuration:
DCE Configuration Menu (on hostname )
selection: 2
S:****** Configuring additional server.
S:****** Please wait for user authentication and
authorization.
NOTE When configuring a multi-system cell, dce_config checks that system
times are within 120 seconds of each other.
2. The Additional Server Configuration menu appears. Choose
Additional CDS Server:
Additional Server Configuration Menu
selection: 1 (Additional CDS Server(s))
S:****** Configuring additional CDS server A CDS server must
have already been configured.
3. dce_config prompts for the name of an existing CDS server. If the
cell has more than one CDS server, choose one:
What is the name of a CDS server in this cell (if there is
more than one, enter the name of the server to be cached if
necessary)? cds_server_node
S:****** Checking for active sec_client service...
S:****** Starting cdsadv...
4. dce_config asks whether it should create a LAN profile for use in
dividing clients and servers into profile groups for higher