Planning and Configuring HP DCE 1.8

86 Chapter5
Configuring HP DCE Cells
Configuring Cells Using dce_config
steps 1 and 2 on that system, and continue with step 10 below.
• If the CDS server is on the same system as the Security server,
continue with step 9 below.
CAUTION Do not configure an additional CDS Server or a replica of a CDS Server
on the same system as your Security Server. Such a configuration is
illegal and unsupported.
9. From the Initial Cell Configuration menu, choose Initial CDS Server:
selection: 2 (Initial CDS Server)
Initial Cell Configuration (on
hostname )
This routine starts up cdsadv and cdsd, initializes the name space,
and sets ACLs for all new name space entries.
S:****** Configuring initial CDS Server...
S:****** Please wait for user authentication and
authorization...
S:****** Checking for active sec_client service...
10.dce_config asks whether it should create a LAN profile for use in
dividing clients and servers into profile groups for higher
performance in multi-LAN cells. If you choose to have a LAN profile
created, dce_config asks for the name of the local LAN. The name
you provide is arbitrary, and is used by dce_config to store LAN
profile information.
Create LAN profile so clients and servers can be divided
into profile groups for higher performance in a multi-lan
cell? (n) y
What is the name of the LAN? lan_250
S:****** Starting cdsadv...
S:****** Starting cdsd...
S:****** Creating LAN profile...
S:****** Setting ACLs for all new namespace
entries...
This system is now configured as a CDS server. You must now create
a DTS server, either on this system or on another system.