Planning and Configuring HP DCE 1.8

84 Chapter5
Configuring HP DCE Cells
Configuring Cells Using dce_config
1. Initial Cell Configuration
2. Additional Server Configuration
3. DCE Client
4. DFS Client
98. Return to previous menu
99. Exit
selection:
2. From the DCE Configuration Menu, choose Initial Cell Configuration:
DCE Configuration Menu (on hostname)
selection: 1 (Initial Cell Configuration)
S:****** Configuring initial cell.
Initial Cell Configuration (on hostname)
1. Initial Security Server
2. Initial CDS Server
3. Initial DTS Server
98. Return to previous menu
99. Exit
selection:
3. Configure the Security Server:
Initial Cell Configuration
selection: 1 (Security Server)
S:****** Configuring initial Security Server
4. If this is your very first cell configuration, or if you have previously
run REMOVE, answer n to the following question. If you are
reconfiguring a cell, answer y:
Do you want to first remove all remnants of previous DCE
configurations for all components (y/n)? You should do so
only if you plan on reconfiguring all existing DCE
components now: (n)
5. Enter a cell name:
Enter the name of your cell (without /...), xyz.abc.com
S:****** Stopping rpcd...