Planning and Configuring HP DCE 1.8

Chapter 5 115

Conﬁguring HP DCE Cells

Integrating DCE Services with MC/ServiceGuard

Summary of DCE-MC/ServiceGuard Installation and

Conﬁguration

The following steps summarize the process of installing and conﬁguring

DCE with MC/Service Guard.

1. Install the MC/ServiceGuard cluster.

2. Start the MC/ServiceGuard cluster.

3. Identify and mount the shared volumes manually from the primary

node.

4. Identify the hostname and IP address to be dedicated for the DCE

package.

5. Manually activate the package IP address from the primary node

using the cmmodnet command.

6. Conﬁgure DCE Core Services.

7. When the above conﬁgurations are complete, the DCE daemons will

start up automatically. Stop them manually using dce_conﬁg.

8. Manually unmount and deactivate the shared volume.

9. Manually deactivate the package IP address from the primary node

using the cmmodnet command.

10.Conﬁgure the DCE package scripts.

11.Apply the Package Conﬁguration on the ServiceGuard cluster.

12.Start the ServiceGuard cluster.