Planning and Configuring HP DCE 1.8

104 Chapter5

Conﬁguring HP DCE Cells

Note for Users of NCS-based Software

At HP-UX 11i, NCS has been obsoleted. Users of NCS-based software

must take the following precautions when conﬁguring HP DCE/9000:

1. Before conﬁguring HP DCE/9000, stop any servers for NCS-based

applications.

2. Stop glbd (via drm_admin "stop") if it is running.

3. Stop llbd (via kill(1)).

4. Conﬁgure HP DCE/9000.

5. If DCE is conﬁgured, proceed to step 6.

If DCE is not conﬁgured, the script /sbin/init.d/ncs starts NCS

services if they are conﬁgured. (NCS is conﬁgured if START_LLBD=1

in /etc/rc.conﬁg.d/ncs.)

6. Restart any servers for NCS-based applications.