Planning and Configuring HP DCE 1.7

Planning and Conﬁguring HP DCE 1.7 5-13

Conﬁguring HP DCE Cells

Conﬁguring Cells Using dce_conﬁg

15.Select NULL, NTP, or SPECTRACOM:

selection: 1 (NULL time provider)

selection: 2 (NTP time provider)

selection: 3 (spectracom time provider)

If you select the NTP time provider, the following prompt appears:

Enter the host name where the NTP server is running:

If you select the spectracom time provider, the following prompt

appears:

Enter the device name where the TP is connected:

You have now completed conﬁguration of the server systems.

Conﬁguring Additional CDS Servers

Follow this procedure if you want to conﬁgure additional CDS servers:

1. From the DCE Conﬁguration Menu, choose Additional Server

Conﬁguration:

DCE Configuration Menu (on hostname)

selection: 2

S:****** Configuring additional server.

S:****** Please wait for user authentication and

authorization.

NOTE When conﬁguring a multi-system cell, dce_conﬁg checks that system

times are within 120 seconds of each other.

2. The Additional Server Conﬁguration menu appears. Choose

Additional CDS Server:

Additional Server Configuration Menu

selection: 1 (Additional CDS Server(s))

S:****** Configuring additional CDS server

A CDS server must have already been configured.

3. dce_conﬁg prompts for the name of an existing CDS server. If the

cell has more than one CDS server, choose one: