Planning and Configuring HP DCE 1.7

5-12 Planning and Configuring HP DCE 1.7
Configuring HP DCE Cells
Configuring Cells Using dce_config
11.From the Initial Cell Configuration menu, choose Initial DTS Server:
selection: 3
S:****** Configuring initial DTS services
S:******Please wait for user authentication and
authorization...
S:****** Checking for active sec_client service...
DTS Configuration Menu
1. DTS Local Server
2. DTS Global Server (only in multi-LAN cells.)
3. DTS Clerk
4. DTS Time Provider
98. Return to previous menu
99. Exit
selection:
12.For servers on the same LAN, select the DTS Local Server:
selection: 1 (DTS Local Server)
For a discussion about the use of DTS global servers for time servers
communicating between LANs, see the OSF DCE Administration
Guide. Where appropriate, select the DTS global server:
selection: 2 (DTS Global Server)
Either selection starts the dts daemon ( dtsd).
13.Configure a DTS time provider on one of the time servers in a cell.
The DTS null time provider configures a system to trust its own clock
as an accurate source of time. The DTS ntp provider obtains an
accurate source of time from some other system outside the cell. The
spectracom time provider uses a local hardware device as a time
provider. See the OSF DCE Administration Guide for more
information on time providers.
14.Select the DTS Time Provider:
selection: 4 (DTS Time Provider)
The following menu is displayed:
DTS Time Provider Menu
1. Configure a NULL time provider
2. Configure a NTP time provider
3. Configure a Spectracom time provider
98. Return to previous menu
99. Exit
selection: