Planning and Configuring HP DCE 1.7

Planning and Configuring HP DCE 1.7 5-11
Configuring HP DCE Cells
Configuring Cells Using dce_config
This routine starts up cdsadv and cdsd, initializes the name space,
and sets ACLs for all new name space entries.
S:****** Configuring initial CDS Server…
S:****** Please wait for user authentication and
authorization…
S:****** Checking for active sec_client service...
10.dce_config asks whether it should create a LAN profile for use in
dividing clients and servers into profile groups for higher
performance in multi-LAN cells. If you choose to have a LAN profile
created, dce_config asks for the name of the local LAN. The name
you provide is arbitrary, and is used by dce_config to store LAN
profile information.
Create LAN profile so clients and servers can be
divided into profile groups for higher performance in
a multi-lan cell? (n) y
What is the name of the LAN? lan_250
S:****** Starting cdsadv...
S:****** Starting cdsd...
S:****** Creating LAN profile…
S:****** Setting ACLs for all new namespace
entries...
This system is now configured as a CDS server. You must now create
a DTS server, either on this system or on another system.
Time servers should be configured in any cell of more than one
system. A minimum of three Time servers is recommended for any
cell with three or more member systems. See the OSF DCE
Administration Guide — Core Services for a discussion of the
optimum placement of servers in a cell with gateway or WAN links.
DTS servers may be configured on any system in the cell.
When dce_config is first run on a system, the HP-UX environment
variable TZ is read to determine the HP-UX local time zone.
dce_config then automatically selects a matching DCE local time
zone and creates the link for / etc/opt/dce/zoneinfo/localtime. A
different time zone can be chosen: see the localtime (5) man page for
details.
To configure a DTS server on this system, or on another system:
• If the DTS server for this cell will be on another system, repeat
steps 1 and 2 on that system, and continue with step 11 below.
• If the DTS server will be on this system, continue with step 11
below.