Planning and Configuring HP DCE 1.7

Planning and Conﬁguring HP DCE 1.7 5-9

Conﬁguring HP DCE Cells

Conﬁguring Cells Using dce_conﬁg

98. Return to previous menu

99. Exit

selection:

2. From the DCE Conﬁguration Menu, choose Initial Cell Conﬁguration:

DCE Configuration Menu (on hostname)

selection: 1 (Initial Cell Configuration)

S:****** Configuring initial cell.

Initial Cell Configuration (on hostname)

1. Initial Security Server

2. Initial CDS Server

3. Initial DTS Server

98. Return to previous menu

99. Exit

selection:

3. Conﬁgure the Security Server:

Initial Cell Configuration

selection: 1 (Security Server)

S:****** Configuring initial Security Server

4. If this is your very ﬁrst cell conﬁguration, or if you have previously

run REMOVE, answer n to the following question. If you are

reconﬁguring a cell, answer y:

Do you want to first remove all remnants of previous DCE

configurations for all components (y/n)? You should do so only

if you plan on reconfiguring all existing DCE components now:

(n)

5. Enter a cell name:

Enter the name of your cell (without /…), xyz.abc.com

S:****** Stopping rpcd...

S:****** Starting dced...

S:****** Initializing dced...

S:****** Since the glbd daemon was restarted and/or

llbd and rpcd were replaced by the endpoint

mapper, NCS applications may need to be

restarted.

6. At the following prompt, enter any string and press < RETURN>.

Enter keyseed for initial database master key: