Planning and Configuring HP DCE 1.7

5-6 Planning and Conﬁguring HP DCE 1.7

Conﬁguring HP DCE Cells

Conﬁguring Cells with DCM

3. Select (double click on) DCE Cell Management.

4. Select (double click on) DCE Conﬁguration Manager.

In a conﬁgured and running cell, if the primary DCE services (Initial

CDS and Master Security) are running on HP systems (as opposed to

other vendors’ systems), you can conﬁgure additional HP DCE 1.2,

1.2.1, 1.3.1, 1.4, 1.4.1, 1.4.2, 1.5, 1.6, or 1.7 clients into the cell from

any HP DCE 1.7 cell member system.

Online Help for DCM

Comprehensive, context-sensitive online help is provided for DCM, as it

is for all functional areas of SAM. Consult the online help for details

about using DCM; detailed information about DCM is not provided here

or in a separate manual.

NOTE The DCM online help assumes a basic familiarity with DCE terms and

concepts, as described in the manual Introduction to DCE.

To access the DCM online help, select (single click on) the DCE

Conﬁguration Manager icon in SAM. Then press F1. Alternatively,

open (double click on) DCE Conﬁguration Manager, and then select

“Introduction to Cell Conﬁguration.”

For informatoin about using the SAM online help system, use the Help

pulldown menu on the SAM screen.

Printing the DCM Online Help

You can print the DCM online help from CDE. The help, however, is not

formatted as it is on the screen: only text is printed (graphics are not

printed).

You can print individual help topics within DCM online help using the

Print button on a help topic screen.

You can use the -dthelpprint command at a shell prompt to print the

entire help volume. The full pathname of the DCM help volume is:

/opt/dce/lib/dcm/C/help/dceconf.sdl

On ASCII terminals, you can only use the dthelpprint command; the

print button is not available. See the dthelpprint (1X) man page for more

information.