Planning and Configuring HP DCE 1.7

4-2 Planning and Configuring HP DCE 1.7
Installing HP DCE 1.7
Overview
Overview
Here is a brief overview of the installation steps:
1. Read Chapter 3, “Before Installing HP DCE 1.7”.
2. Load HP DCE software from media to a network source area using
swcopy.
3. Install filesets on individual systems using swinstall.
NOTE Although HP DCE/9000 Version 1.7 can be installed on both the HP-UX
11.0 32-bit and the 64-bit OS, HP DCE/9000 Version 1.7 remains a 32-bit
application. HP DCE/9000 Version 1.7 does not support development of
64-bit DCE applications.