Planning and Configuring HP DCE 1.7

3-8 Planning and Configuring HP DCE 1.7
Before Installing HP DCE/9000 Version 1.7
Preinstallation Planning
If you are running AFS, be sure to run the AFS daemon (afsd) with the
-nosettime option. Otherwise, afsd periodically resets the system’s
time. Also be sure that no other software that sets the time (like ntp or
timed) is running on the systems in the cell.
See the OSF DCE Administration Guide —- Core Services for more
information about DCE Distributed Time Services.
At this release, intercell time synchronization is not supported.
HP DCE Installed Software
The HP DCE/9000 Version 1.7 software is divided into products and
filesets. Tables 3-1 and 3-2 show the HP DCE 1.7 filesets, arranged
according to product, and gives the approximate disk space requirement
for each file set. Table 3-1 includes the products that are bundled with
HP-UX; Table 3-2 contains the products distributed on the Applications
Release media. Note that the information in Tables 3-1 and 3-2 is also
available from swinstall.
Note the following:
• You must install DCE-Core on every system in your cell.
• The swcopy and swinstall tools check for adequate disk space
before they install software.
Table 3-1 HP DCE/9000 Version 1.7 Products and Filesets—Core HP-UX
Product Fileset Description Dependencies
Approx.
Size
(Kb)
DCE-Core DCE-CORE-DTS DCE Distributed
Time Service
DCE-Core.DCE-
CORE-RUN
847
DCE-CORE-HELP DCE Online Help none 153
DCE-CORE-NOTES DCE release
notes
none 469
DCE-CORE-RUN DCE Core Client DCE-Core.DCE-
CORE-SHLIB
13336