HP-UX Containers (SRP) A.03.01.006 Release Notes (766153-001, March 2014)

Depot example: Here, HP-UX OE depot is hosted on the remote system hostX:

# swinstall -x autoreboot=true -s hostX:/release/11.31.1403/HPUX11i-BOE.ALL

HP-UX-SRP

Media example: Here, HP-UX OE media is mounted at /dvdrom:

# swinstall -x autoreboot=true -s /dvdrom HP-UX-SRP

The swinstall command displays an error message if the installation fails. Examine the

/var/adm/sw/swagent.log file for information if the installation failed.

5. Run the swverify command to ensure that the products that you selected installed correctly. If

the installation is successful, many files are displayed and a success message appears after

the verification is complete.

# swverify HP-UX-SRP

1.5.5 Removing (un-installing) HP-UX Containers product

Use the following steps to remove (un-install) HP-UX Containers product from your HP-UX 11i v3

March 2014 system:

1. Logon to your system as the root user.

2. Stop all configured containers:

# srp -stop container_name

3. Remove all configured containers:

# srp -delete container_name

4. Disable HP-UX Containers:

# srp_sys -disable

5. Remove the HP-UX-SRP bundle:

# swremove –x autoreboot=true HP-UX-SRP

NOTE: Only the HP-UX-SRP bundle will be removed from the system. All other dependencies

(installed at the time of product installation) will remain on the system.

6. Use the swlist command to verify that the HP-UX-SRP bundle is removed from the system.

The swlist command will not report the components of HP-UX-SRP if they were successfully

removed from the system.

# swlist HP-UX-SRP

1.6 Upgrading to HP-UX Containers A.03.01.006

HP-UX Containers A.03.01.006 supports upgrades from HP-UX SRP A.02.02 and later. If you have

workload SRPs configured using HP-UX SRP A.02.02 and you need to continue using them, you can