HP-UX Containers (SRP) A.03.01.005 Release Notes (5900-2995, March 2013)

12
should default to the private subtype.
QXCR1001145038
Detection of unsupported file system configuration.
A.03.01
QXCR1001130478
The update-ux command was not supported with
HP-UX Containers A.03.00.x.
A.03.01
QXCR1001099531
Container Manager (formerly SRP Manager) does
not support configuring multiple IP addresses for
containers.
A.03.01
QXCR1001118698
The srp_init daemon creates a core file if srp_init is
restarted within a container.
A.03.01
QXCR1001129712
The srp_init daemon cannot handle duplicate
respawn inittab entries with the same command
name as specified in the /etc/inittab file.
A.03.01
QXCR1001126499
The interface statfsdev(3C) and the command
fstyp(1M) will not work for the devices that are
accessible within a system container.
A.03.01
QXCR1001142606
Content of the /etc/fstab file is not mounted when
the system container starts.
A.03.01
QXCR1001119940
The srp –stop command hangs if there are
active NFS mount points present in a system
container.
A.03.01
QXCR1001060209
Support for cloning an existing container to a local
or remote system with a different container name.
A.03.01
QXCR1001129210
Support for multiple containers when using the
HP9000 Containers product.
A.03.01
1.8 Limitations for HP-UX Containers A.03.01.005
When the HP-UX Containers A.03.01.005 bundle is installed on the system, the following
features are not available:
1. Installation from a remote network registered SD depot is not supported for software
installation. See the HP-UX Containers (SRP ) A.03.01 Administrator’s Guide for alternative
options.
2. Only the non-interactive command line interface (CLI) for the SD commands is supported
when one or more system containers are configured.
3. Creating a golden image using Ignite-UX with system containers configured is not
supported.
4. DRD clone and modifications with system containers configured is not supported.