HP-UX Containers (SRP) A.03.01 Release Notes

8. Run the swverify command to ensure that the products that you selected installed correctly.

If the installation is successful, many files are displayed and a success message appears after

the verification is complete.

# swverify HP-UX-SRP

1.5.5 Removing (un-installing) HP-UX Containers product

Use the following steps to remove (un-install) HP-UX Containers product from your HP-UX 11i v3

March 2011 (or later) system:

1. Logon to your system as the root user.

2. Stop all configured containers:

# srp -stop container_name

3. Remove all configured containers:

# srp -delete container_name

4. Disable HP-UX Containers :

# srp_sys -disable

5. Remove the HP-UX-SRP bundle:

# swremove –x autoreboot=true HP-UX-SRP

NOTE: Only the HP-UX-SRP bundle will be removed from the system. All other product

bundles included in the HP-UX Containers A.03.01 bundle will remain on the system.

6. Use the swlist command to verify that the HP-UX-SRP bundle is removed from the system.

The swlist command will not report the components of HP-UX-SRP if they were successfully

removed from the system.

# swlist HP-UX-SRP

1.6 Upgrading to HP-UX Containers A.03.01

HP-UX Containers A.03.01 supports upgrades from HP-UX SRP A.02.02 and later. If you have

workload SRPs configured using HP-UX SRP A.02.02 and you need to continue using them, you can

migrate the workload SRPs to workload containers after the upgrade. Before you install HP-UX

Containers A.03.01, make sure that all configured containers are stopped.

If your system has an operating system older than HP-UX 11i, March 2011 release, you must first

update your system to March 2011 release before installing HP-UX Containers A.03.01.

The srp_migrate utility migrates existing HP-UX-SRP A.02.02

workload SRPs to HP-UX Containers

A.03.01 workload containers. The HP-UX SRP A.02.02 workload SRPs are not visible in the HP-UX

Containers A.03.01 environment until you run the srp_migrate utility.

1.6.1 Upgrade requirements

• HP-UX Containers A.03.01 can only migrate systems running HP-UX SRP A.02.02 and later.