HP-UX Containers (SRP) A.03.01 Administrator's Guide

19
Figure 4.2 Container Manager home page
NOTE: From the Container Manager help files, select the Displaying Container List and
Status help menu item for more information on the Container Manager home page.
4.3 Accessing Container Manager help
To access help information for any Container Manager page, click the question mark icon
located in the upper right corner of the Container Manager homepage.
4.4 Setting the HP-UX Containers environment
Before you can create any container, you must setup your HP-UX Containers environment. The system
properties verify that the subsystem level configuration meets the requirements to configure a container
on the host. To use the HP-UX Containers technology, you must enable the core subsystem properties
before creating containers on the system by either using
the srp_sys command (with the –enable
or –setup option) or by using the Container Manager.
To enable HP-UX Containers technology using the Container Manager, follow these steps:
1. Go to the System Properties tab.
2. Click the Enable button for the SRP core subsystems property.
3. Wait for the successful completion message to appear in the result window.
4. Enable the compartment login feature, the PRM service, and the sshd
configuration properties. Optionally, you can enable other properties.
5. Reboot the system to enable the required properties.
NOTE: The Container Listing tab will only be displayed if the SRP core subsystem property
status is set to OK.