HP-UX Containers (SRP) A.03.00 Release Notes

1.5.3 Installing HP-UX Containers product

To install HP-UX Containers on your HP-UX 11i v3 March 2011 system, follow these steps:

1. Be sure your system meets all prerequisites described above.

2. Click Receive for Free>>.

3. Enter your registration information. Read and accept the Terms and Conditions and the

Software License Agreement. Click Next.

4. Click Download. Save the HP-UX-SRP bundle as a local file on your system. For example:

/tmp/HP-UX-SRP_A.03.00.depot

5. Verify that the depot file is on your system using the following command:

# swlist -d @ /tmp/HP-UX-SRP_A.03.00.depot

6. Log in to your system as the root user.

7. To install the HP-UX-SRP bundle, enter the following line:

# swinstall –x autoreboot=true –s /tmp/HP-UX-SRP_A.03.00.depot \*

The swinstall command displays an error message if the installation fails. Check the

/var/adm/sw/swagent.log file for information if the installation failed.

8. Run the swverify command to ensure that the products that you selected installed correctly.

If the installation is successful, many files are displayed and a success message appears after

the verification is complete.

# swverify HP-UX-SRP

1.5.4 Removing (un-installing) HP-UX Containers product

Use the following steps to remove (un-install) HP-UX Containers product from your HP-UX 11i v3

March 2011 system:

1. Logon to your system as the root user.

2. Stop all configured containers:

# srp -stop container_name

3. Remove all configured containers:

# srp -delete container_name

4. Disable HP-UX Containers :

# srp_sys -disable

5. Remove the HP-UX-SRP bundle:

# swremove –x autoreboot=true HP-UX-SRP FsSrp