HP-UX Containers (SRP) A.03.00 Administrator's Guide

87
Service Variable Description
Default: None.
ip_mask
IP subnet mask for this container (For IPv4 address
only).
Default: The network mask for the address class, as
specified in RFC791 (IETF specification).
gw_ip_address
Gateway IP address for the default route for the
configured container IP address. Enter the value 0 to
specify no gateway IP address.
Default: Same as the IP address configured for this
container.
ipfilter
ipf_for_ipsec
Specify whether to allow IPFilter rules to allow IPSec
packets (Yes or No).
Default: No.
ipsec
ipsec_peer_addr(+)
Destination IP address for the IPSec policies.
Valid Input: An IPv4 address in dotted-decimal notation
or an IPv6 address in colon-hexadecimal notation.
Default: None
ipsec_transform
Transform for IPSec host policy.
Valid Input:
ESP_AES128_HMAC_SHA1
ESP_AES128_HMAC_MD5
ESP_3DES_HMAC_SHA1
ESP_3DES_HMAC_MD5
ESP_NULL_HMAC_SHA1
ESP_NULL_HMAC_MD5
Default:
ESP_AES128_HMAC_SHA1.
ipsec_psk(+)
Preshared key used by IPSec Peer.
Parameter Name: ipsec_psk.
Valid value: A text string, containing 1 - 128 ASCII
characters (whitespaces are not allowed).
Default: None.
provision
script
Run a provision script when a container is operated on
by srp command. All input to the command are passed
into the script.
Default:/opt/hpsrp/bin/util/custom_srpsys_
setup.
(*) Required services for a container (or to create a container).
(+) No default, these variables need a value to be assigned for adding or replacing the
corresponding services.