HP-UX CMGR A.02.00 Administrator's and Developer's Guide

# swlist -d @ /tmp/srp_depot_name.depot
7. To install the CMGR product only, enter the following command:
# swinstall -s /tmp/srp_depot_name.depot CMGR
To install the CMGR and SRP products, enter the following command:
# swinstall -s /tmp/srp_depot_name.depot HP-UX-SRP
2.3 Verifying the HP-UX CMGR Installation
Verify the installation of the HP-UX Configuration Synchronization Manager using
the following steps:
1. Run the swverify command to ensure that the products that you selected installed
correctly. If the installation is successful, many files are displayed and a success
message appears after the verification is complete.
If you installed the CMGR product only:
# swverify CMGR
If you installed the CMGR and the SRP products:
# swverify HP-UX-SRP
2. Run the swlist command to verify that the products are configured correctly on
your system:
If you installed the CMGR product only:
# swlist -a state -l fileset CMGR
If you installed the CMGR and the SRP products:
# swlist -a state -l fileset HP-UX-SRP
If the product is configured correctly, each fileset is displayed as configured.
14 Installing CMGR