HP-UX CMGR A.02.00 Administrator's and Developer's Guide

2 Installing CMGR
The HP-UX Configuration Synchronization Manager (cmgr) is part of the HP-UX-SRP
bundle. The HP-UX-SRP bundle consists of two products: CMGR and SRP. The CMGR
product includes the CMGR runtime commands and libraries. The SRP product includes
the SRP application templates and setup scripts. You can install the HP-UX-SRP bundle
with both products, or you can install the CMGR product only.
This section describes the steps required to install and configure the cmgr toolkit. It
addresses the following topics:
• System and Environment Requirements (Section 2.1)
• Installing HP-UX CMGR (Section 2.2)
• Verifying the HP-UX CMGR Installation (Section 2.3)
2.1 System and Environment Requirements
HP-UX Configuration Synchronization Manager (CMGR) requires the following
software:
• HP-UX 11i Version 3 (B.11.31) for HP 9000 and HP Integrity servers
• HP-UX Security Containment Extensions patch PHCO_38507
The following HP-UX IPFilter, HP-UX IPSec, and HP PRM versions are required if you
are using CMGR to manage these subsystems:
• HP-UX IPFilter version A.11.31.15.01 or later
• HP-UX IPSec version A.02.01.01 or later
• HP Process Resource Manager (PRM) version C.03.03.01 or later
2.2 Installing HP-UX CMGR
To install cmgr, follow these steps:
1. Go to HP Software Depot:
http://software.hp.com
2. Search for HP-UX Secure Resource Partition. Read the product information Web
page for the latest updates and release information.
3. Click Receive for Free>>.
4. Enter your registration information. Read and accept the Terms and Conditions
and the Software License Agreement. Click Next.
5. Click Download. Save the HP-UX Secure Resource Partition bundle as a local file
on your system. For example, using the file name /tmp/srp_depot_name.depot.
6. Verify that the depot file is saved on your system by using the following command:
2.1 System and Environment Requirements 13