HP 9000 Containers A.03.01 on HP Integrity Server Administrator Guide HP-UX 11i v3 (5900-3112, June 2013)

$ swinstall –x autoreboot=true <new SRP depot>
Enable SRP:
$ srp_sys –setup
PRM can be enabled if you want to host other containers on the same system.
7. Install the latest version of HP 9000 Containers.
8. Install the recommended patches listed in Section 2.2 (page 15).
When the upgrade is completed, reboot the system. After reboot, create the HP 9000 system
container by following the steps in Chapter 4 (page 21).
There can be other application-specific files in the /etc directory that might have got updated
after the transition from HP 9000 server. If application testing encounters errors, examine the files
that need to be restored from the /tmp/etc directory.
After the testing is completed, delete all the HP 9000 users and groups from the global /etc/
passwd and /etc/group files on the Integrity host system.
44 Upgrading HP 9000 Containers versions