HP CIFS Server 3.0f Administrator's Guide verison A.02.03

NOTE: HP recommends that new installation customers run the samba_setup program to set up and
configure the HP CIFS Server.
You can quickly run the samba_setup program to configure the HP CIFS Server with the LDAP feature
support as follows:
1. Run the following commands to enable the LDAP feature:
$ export PATH=$PATH:/opt/samba/bin
$ samba_setup
When running the samba_setup program, you will be asked whether you want to use LDAP or not.
Press Yes to use LDAP, and press No to disable LDAP.
2. Reply to the samba_setup program to configure the following global LDAP parameters in the
/etc/opt/samba/smb.conf file:
• ldap server
• ldap port
• ldap suffix
• ldap admin dn
• ldap ssl
• ldap user suffix
• ldap group suffix
• ldap idmap suffix
• ldap machine suffix
• ldap delete dn
• ldap passwd sync
• ldap replication sleep
• ldap timeout
See “LDAP Configuration Parameters”, for detailed information on how to configure these new
parameters.
Configuring the HP CIFS Server 93