HP CIFS Server 3.0f Administrator's Guide verison A.02.03

1. Enter the DN of the directory user. The default value is displayed. To use the default, press the
Enter key; otherwise, enter you DN name.
2. Enter the password.
7. If you are creating a new profile, add all parent entries of the profile DN to the directory (if any). If you
attempt to create a new profile and any parent entries of the profile do not already exist in the directory,
setup will fail. For example, if your profile will be cn=ldapuxprofile, dc=org, dc=hp, dc=com,
then the base path, org.hp.com,must exist in the directory or setup will fail.
While creating a new profile, add all parent entries of the profile DN to the directory. setup will fail if
you attempt to create a new profile without all the parent entries.
8. Next enter either the DN of a new profile, or the DN of an existing profile you want to use.
To display all the profiles in the directory, use a command like the following:
$ ldapsearch -b o=org.hp.com objectclass=DUAConfigProfile dn
If you are using an existing profile, setup configures your client, downloads the profile, and exits. In
this case, continue with step 11 below.
9. If you are creating a new profile, enter the directory manager DN and password of the directory user
who can create a new profile.
10. Next enter the host name and port number of the directory where you want to store your name service
data. For high availability, each LDAP-UX client can look for name service data in up to three different
directory hosts. You can enter up to three hosts, to be searched in order.
11. Enter the base DN where clients should search for user name service data like passwd, group, hosts,
services, etc.
12. You can quickly configure a directory server and the first client by accepting the remaining default
configuration parameters when prompted.
Table 6-1 “Configuration Parameters and Default Values” shows the configuration parameters and
the default values that they will be configured with.
Table 6-1 Configuration Parameters and Default Values
Default ValueParameter
AnonymousType of client binding
5 secondsBind time limit
no limitSearch time limit
YesUse of referrals
0 - infiniteProfile TTL (Time To Live)
YesUse standard RFC-2307 object class attributes for supported services
YesUse default search descriptions for supported services
SimpleAuthentication method
For the detailed configuration parameters information listed in the table 6-1, see " Appendix B: LDAP-UX
Client Services Object Classes " of LDAP-UX Client Services B.03.20 Administrator's Guide at
http://www.docs.hp.com .
13. After entering all the configuration information, setup extends the schema, creates a new profile, and
configures the client to use the directory.
14. Configure the Name Service Switch (NSS).
Save a copy of the /etc/nsswitch.conf file and edit the original to specify the ldap name service
and other name services you want to use. See the /etc/nsswitch.ldap file for a sample. You may
be able to just copy /etc/nsswitch.ldap to /etc/nsswitch.conf. See nsswitch.conf (4) for
more information.
15. You will be asked whether or not you want to start the client daemon,
/opt/ldapux/bin/ldapclientd. You must start the client daemon for LDAP functions to work.
16. Run the following command to verify your configuration:
84 LDAP Integration Support