HP CIFS Server 3.0f Administrator's Guide verison A.02.03

Edit the samba.cntl Control Script
To configure the samba.cntl Control Script file, you must complete the following tasks:
1. Create a volume group of either logical volume groups or VxVM volume groups for the HP CIFS Server
directories. For example,
VG[0]=/dev/vg01 # for LVM volume group
DG[0]=/dev/vx/dg01 # for VxVM volume group
...for pkg1, and
VG[0]=/dev/vg02 # for LVM volume group
DG[0]=/dev/vx/dg02 # for VxVM volume group
...for pkg2, etc.
2. Create a separate LV[n] and FS[n] variable for each volume group and file system that will be
mounted on the server. For example,
for pkg1:
for LVM volume group
LV[0]=/dev/vg01/lvol1;FS[0]=/your/data1;
FS_MOUNT_OPT[0]="-o rw" FS_UMOUNT_OPT[0]="";
FS_FSCK_OPT[0]=""; FS_TYPE[0]="vxfs"
LV[1]=/dev/vg01/lvol2;FS[1]=/your/data2;
FS_MOUNT_OPT[0]="-o rw" FS_UMOUNT_OPT[0]="";
FS_FSCK_OPT[0]=""; FS_TYPE[0]="vxfs"
for VxVM volume group
LV[0]=/dev/vx/dg01/lvol1;FS[0]=/your/data1;
FS_MOUNT_OPT[0]="-o rw" FS_UMOUNT_OPT[0]="";
FS_FSCK_OPT[0]=""; FS_TYPE[0]="vxfs"
LV[1]=/dev/vx/dg01/lvol2;FS[1]=/your/data2;
FS_MOUNT_OPT[0]="-o rw" FS_UMOUNT_OPT[0]="";
FS_FSCK_OPT[0]=""; FS_TYPE[0]="vxfs"
for pkg2:
for LVM volume group
LV[0]=/dev/vg02/lvol1;FS[0]=/halvm/2a;
FS_MOUNT_OPT[0]="-o rw" FS_UMOUNT_OPT[0]="";
FS_FSCK_OPT[0]=""; FS_TYPE[0]="vxfs"
LV[1]=/dev/vg02/lvol2;FS[1]=/halvm/2b;FS_MOUNT_OPT[0]="-o rw"
FS_UMOUNT_OPT[0]=""; FS_FSCK_OPT[0]=""; FS_TYPE[0]="vxfs"
for VxVM volume group
LV[0]=/dev/vx/dg02/lvol1;FS[0]=/your/data3;
FS_MOUNT_OPT[0]="-o rw"
FS_UMOUNT_OPT[0]="";
FS_FSCK_OPT[0]=""; FS_TYPE[0]="vxfs"
LV[1]=/dev/vx/dg02/lvol2;FS[1]=/your/data4;
FS_MOUNT_OPT[0]="-o rw" FS_UMOUNT_OPT[0]="";
FS_FSCK_OPT[0]=""; FS_TYPE[0]="vxfs"
3. Specify the relocatable IP address and the address of the subnet to which the IP address belongs:
IP[0]=1.13.17.20
SUBNET[0]=1.13.168.0
158 Configuring HA HP CIFS