HP CIFS Server 3.0f Administrator's Guide verison A.02.03

# with "log." if you plan to use "%m" this way
log file = /var/opt/samba/pkg1/logs/log.%m
lock directory = /var/opt/samba/pkg1/locks
pid directory = /var/opt/samba/pkg1/locks
smbpasswd file = /var/opt/samba/pkg1/private/smbpasswd
Replace the "XXX.XXX.XXX.XXX/xxx.xxx.xxx.xxx" with one relocatable IP address and subnet
mask for the MC ServiceGuard package.
If /opt/samba/bin/samba_setup was run during installation as suggested:
• Take the workgroup line from the /etc/opt/samba/smb.conf file. Add in the rest of your desired
configuration items.
• Take the NetBIOS name line from the same file, or, if there is no NetBIOS name line, put in the
UNIX host name for the server on the NetBIOS name line.
• Consider load balancing when creating the share paths.
• Consider whether you need to locate your smbpasswd and private files on a shared volume, etc.
You may want to review "Special Notes for HA HP CIFS Server" found at the end of this section,
now. If you run SWAT or smbpasswd utilities, keep in mind that they will be operating on
smb.conf not your smb.conf.<package name> configuration. You may want to copy
smb.conf.<package name> to smb.conf for this reason. Domain security configurations
require 'net join' to run in order to join the domain. Since this command updates the secrets.tdb
file, you should perform this step after smb.conf has been updated with the correct (possibly
shared logical volume) path to the private directory (configured with "smb passwd file" in
smb.conf).
Make sure that the file name is in all lowercase letters (e.g. /etc/opt/samba/smb.conf.pkg1 ,
NOT /etc/opt/samba/smb.conf.PKG1 ). If capital letters are used in the file name, failover will
not work properly.
3. Move all relevant data to the HP CIFS Server package shared volume.
Relevant data, consisting of all directories and files which will be accessed using HP CIFS Server, should
reside on shared volumes. This data includes any shares created by the user. For example, if the HP
CIFS Server administrator creates a TEST=c:/tmp/test share, then all the data from /tmp/test
should reside on a shared logical volume.
Below is an example of copied data from the required HP CIFS Server directories to the logical volumes
in the volume group vg01 . The same can be done for pkg2 .
mkdir /tmp/share1 /tmp/share2
mount /dev/vg01/lvol1 /tmp/share1
mount /dev/vg01/lvol2 /tmp/share2
cp -r /your/data1/* /tmp/share1
cp -r /your/data2/* /tmp/share2
umount /tmp/share1
umount /tmp/share2
rm -rf /tmp/share1 /tmp/share2
4. Create a directory for HP CIFS Server cluster package:
mkdir /etc/cmcluster/samba/pkg1
5. Copy the sample scripts samba.conf , samba.cntl and samba.mon from /opt/samba/HA to
/etc/cmcluster/samba/pkg1 (or /etc/cmcluster/samba/pkg2 ) on the primary node. Make all scripts
writeable.
cp /opt/samba/HA/samba.* /etc/cmcluster/samba/pkg1
chmod 666 samba.conf samba.cntl samba.mon
156 Configuring HA HP CIFS