HP CIFS Server 3.0f Administrator's Guide verison A.02.03

preferred master = No
domain master = No
wins server = 1.13.115.226 # Set the PDC ad Wins Server
wins support = yes
ldap port = 389
ldap admin dn = cn=Directory Manager
ldap group suffix = ou=Groups
ldap machine suffix = ou= Computers
ldap suffix = dc=org, dc=hp, dc=com
ldap ssl = no
ldap user suffix = ou= People
read only = No
short preserve case = No
dos filetime resolution = Yes
#
[homes]
comment = Home Directory
browseable = No
Configuration Options
• workgroup: This parameter specifies the name of the domain in which the HP CIFS Server is a domain
member.
• security: When the HP CIFS Server joins a domain as a member, you must set this parameter to
domain.
• WINs Server: If you attempt to use the PDC as the Wins server, set this parameter to the PDC's
machine name.
• password server: This parameter defines the NetBIOS names of the PDC and BDC machines that
perform the user name authentication and validation.
A Sample /etc/nsswitch.ldap File
When you set up the PDC, BDC and member servers using the LDAP backend support, you need to configure
the /etc/nsswitch.conf file to restrieve your user account information from Netscape Directory Server.You
can save a copy of the/etc/nsswitch conf file and edit the original to specify the LDAP name service
and other name services that you want to use. You may just copy /etc/nsswitch.ldap to
/etc/nsswitch.conf.
The following is a sample /etc/nsswitch.ldap used in the sample Samba Domain Model shown in the
Figure 9-5:
# /etc/nsswitch.ldap #
# You can copy this sample file to /etc/nsswitch.conf. #
# This sample file uses Lightweigh Directory Access #
# Protocol(LDAP) in conjunction with dns and files. #
passwd: files ldap
group: files ldap
hosts: dns [NOTFOUND=return] files ldap
networks: files ldap
protocols: files ldap
rpc: files ldap
publickey: files
netgroup: files ldap
automount: files
aliases: files
services: files ldap
128 HP CIFS Deployment Models