HP CIFS Server 3.0d Administrator's Guide version A.02.02 (Edition 5)

Installing and Conﬁguring the HP CIFS Server

Step 3: Modify the Conﬁguration

Chapter 232

objectClass:printQuene

printerName:lj1005

serverName:HPSERVERA

objectClass:top

objectClass:leaf

objectClass:connectionPoint

objectClass:printQuene

printerName:lj3200

serverName:HPSERVERB

Removing a Printer

To remove a printer from the ADS domain, run the following command:

$ net ads printer remove <printer_name>

For example, the following command removes the printer lj1005 from the

ADS domain:

$ net ads printer remove lj1005

Re-Publishing a Printer

To publish a printer for the ﬁrst time, you must use the procedures

described in section “Publishing Printers from a Windows Client”. If you

remove a printer, you can use the following command to re-publish it:

$ net ads printer publish <printer_name>

For example, the following command re-publishes the printer lj1005 to

the ADS domain:

$ net ads printer publish lj1005

Setting Up Distributed File System (DFS) Support

This section will provide the procedures for:

• Setting up a DFS Tree on a HP CIFS Server

• Setting up DFS Links in the DFS root directory on a HP CIFS Server

NOTE HP does not recommend ﬁlesharing of the root directory. Only

subdirectories under the root should be set up for ﬁlesharing.