HP CIFS Server 3.0d Administrator's Guide version A.02.02 (Edition 5)

Installing and Conﬁguring the HP CIFS Server

HP CIFS Server Requirements and Limitations

Chapter 2 17

HP CIFS Server Requirements and

Limitations

Prior to installing the HP CIFS product, check that your system can

accommodate the following product requirements and limitations.

HP-UX Memory and Disc Requirements

32-bit and 64-bit HP-UX 11i v1 systems can boot with as little as 64 MB

of RAM and 1GB of disk space. 64-bit HP-UX 11i v2 system can boot with

as little as 1GB of RAM and 2 GB of disk space. HP recommends the

following minimum memory and disk requirements to allow for growth

and maintenance:

• HP-UX 11i v1 32-bit—128MB RAM—1-2 GB disk

• HP-UX 11i v1 64-bit—512MB RAM—2-3 GB disk

• HP-UX 11i v2 64-bit—1 GB RAM for each CPU—2-8.5 GB disk

HP CIFS Server A.02.02 Installation Requirements

HP CIFS Server A.02.02 requires approximately 78 MB of disk space for

installation on the HP-UX 11i v1 machine and 146 MB of disk space on

the HP-UX 11i v2 machine. The HP CIFS Server is composed of the

following components:

• CIFS Server source code ﬁles/HP-UX 11i v1 — 27.2 MB

• CIFS Server File and Print Services/HP-UX 11i v1 — 50.7 MB

• CIFS Server source code ﬁles/HP-UX 11i v2 —25.3 MB

• CIFS Server File and Print Services/HP-UX 11i v2 —120.2 MB

NOTE The CIFS Server source code ﬁles are not required for successful

execution of HP CIFS Server. You can remove them after installation at

the following location:

/opt/samba_src