HP CIFS Server 3.0b Administrator's Guide version A.02.01.01

Conﬁguring HA HP CIFS

Overview of HA HP CIFS Server

Chapter 11 237

6. The following initialization will cause package failover to occur if

there is a node or network failure, even if the HP CIFS Server

monitor script is not being used.

PKG_SWITCHING_ENABLED YES

NET_SWITCHING_ENABLED YES

7. If NODE_FAIL_FAST_ENABLE is set to NO, the node is not brought down

when the package goes down.

NODE_FAIL_FAST_ENABLED NO

Edit the samba.cntl Control Script

To conﬁgure the samba.cntl Control Script ﬁle, you must complete the

following tasks:

1. Set the NETBIOS_NAME variable to your NetBIOS name.

NETBIOS_NAME=ha_server1

...for sambapkg1 and

NETBIOS_NAME=ha_server2

...for sambapkg2, etc.

2. Create a volume group for the HP CIFS Server directories:

VG[0]=/dev/vgsambapkg1

...for sambapkg1, and

VG[0]=/dev/vgsambapkg2

...for sambapkg2, etc.

3. Create a separate LV[n] and FS[n] variable for each volume group

and ﬁle system that will be mounted on the server, for example:

LV[0]=/dev/vgsambapkg1/lvol1;FS[0]=/opt/share1

LV[1]=/dev/vgsambapkg1/lvol2;FS[1]=/home/share2

Add more LVs if required for sambapkg.

LV[0]=/dev/vgsambapkg2/lvol1;FS[0]=/opt/share1

LV[1]=/dev/vgsambapkg2/lvol2;FS[1]=/home/share2

Add more LVs if required for sambapkg2.

4. Specify the relocatable IP address and the address of the subnet to

which the IP address belongs: