HP CIFS Client A.02.02.03 Administrator's Guide

[8] rare
Logging of rare conditions. Used only during debugging.
[9] cacheDebug
Debugging of the cache's operation. Used only during
debugging.
[10] cifsTrace
Logging of all CIFS commands issued and the respective
return values. Very useful together with netbiosTrace for
debugging, but should really be turned off during normal
operation.
[11] oplock
Debugging of opportunistic lock mechanism. Used only
during debugging.
[12] warn
Warnings of any kind, mostly used by the configuration file
parser. Should be turned on.
[13] smbSequence
Debugging messages about the order of HP CIFS requests
and the respective messages. Used only during debugging.
[14] debugAttributes
Debugging of file attribute routines. Useful only during
debugging.
[15]smbConnect
Debugging of server connection and disconnection messages
for NetBIOS. Useful only during debugging.
[16] uiTrace
Generates hex-dumps of the communication with user
interface. This is useful during debugging but should be
turned off for normal operation.
[17] nbnsTrace
Generates hex-dumps of all NetBIOS name service traffic.
This is useful during debugging but should be turned off for
normal operation.
[18] diskarb
Debugging of disk arbitration. Useful only during
debugging.
[19] authentication
Debugging of CIFS authentication details. Useful only during
debugging.
The default logging modes are info, error,
netbiosError, warn, smbConnect. The default logging
setting is as follows:
logLevels = (
info,
error,
# debug,
# resource,
netbiosError,
Configuration Parameters 49