Boot Authenticator vB.11.11.01 for Standard Mode of HP-UX Product Note

Boot Authenticator for Standard Mode of HP-UX

Removing BOOTAUTH11i

Chapter 1

Removing BOOTAUTH11i

To remove the BOOTAUTH11i product, use the following command:

# swremove SM-BootAuth

NOTE You do not need to reboot the system after removing this product.

The swremove command removes the core functionality of BOOTAUTH11i, leaving the

bundle wrapper and patches on your system. Do not remove the patches that were

included with the product bundle. HP recommends that you retain those patches on your

system.

For more information on managing patches on your system, see HP-UX Patch

Management, part number 5967-3578. This document is available on the Support Plus

media as well as on the HP documentation web site at

http://docs.hp.com.com/hpux/pdf/5967-3578.pdf.

In addition, it is a good idea to manually remove the BOOT_AUTH entry from the

/etc/default/security ﬁle. However, it is not mandatory that you remove this entry

as it will have no effect on your system after removing SM-BootAuth.