HP Auto Port Aggregation Administrator's Guide HP-UX 11i v3 (766140-001, March 2014)

Ctrl+z
Switch1(config)#interface port-channel 7
Switch1(config-if)#no shutdown
Switch1(config-if)#end
1
Enter configuration commands, one per line. End with Ctrl+z or end.
Displaying the link aggregation
cisco2#show etherchannel port-channel
Channel-group listing:
----------------------
Group: 1
----------
Port-channels in the group:
---------------------------
Port-channel: Po1 (Primary Aggregator)
------------
Age of the Port-channel = 3d:02h:44m:26s
Logical slot/port = 10/1 Number of ports = 2
HotStandBy port = null
Port state = Port-channel Ag-Inuse
Protocol = LACP
Port security = Disabled
Ports in the Port-channel:
Index Load Port EC state No of bits
------+------+------+------------------+-----------
0 00 Gi1/0/5 Active 0
0 00 Gi1/0/13 Active 0
Time since last port bundled: 3d:00h:47m:47s Gi1/0/13
Time since last port Un-bundled: 3d:00h:51m:00s Gi1/0/13
Displaying a Port in a link aggregation
cisco2#show interface GigabitEthernet 1/0/5 etherchannel
Port state = Up Mstr Assoc In-Bndl
Channel group = 1 Mode = Active Gcchange = -
Port-channel = Po1 GC = - Pseudo port-channel = Po1
Port index = 0 Load = 0x00 Protocol = LACP
Flags: S - Device is sending Slow LACPDUs F - Device is sending fast LACPDUs.
A - Device is in active mode. P - Device is in passive mode.
Local information:
LACP port Admin Oper Port Port
Port Flags State Priority Key Key Number State
Gi1/0/5 SA bndl 32768 0x1 0x1 0x106 0x3D
Partner's information:
LACP port Admin Oper Port Port
Port Flags Priority Dev ID Age key Key Number State
Gi1/0/5 SA 0 d4c9.ef06.945e 27s 0x0 0x384 0x4 0x3D
Age of the port in the current state: 3d:00h:54m:27s
Cisco 3120X switches 99