HP Auto Port Aggregation Administrator's Guide HP-UX 11i v3 (766140-001, March 2014)
8
A list of the ports connected to the active port. This indicates that polling packets are being
sent successfully between the active port and the connected port(s). This field is displayed only
when the Mode is LAN_MONITOR.
9
The failover policy for the failover group. For a description of failover policy, see “Failover
group” (page 9) and “Preparing for configuration” (page 23). The policy tells how active
port is selected.
In contrast to the verbose option, the -A all option displays as much information as possible,
independent of the mode. Example 6 shows the verbose option with all attribute values relevant
to the LACP_AUTO mode for the lan920. Example 7 shows the –A all option with all attribute
values relevant to the LACP_AUTO mode other information for lan920.
HP APA tasks and the nwmgr command 45