HP Auto Port Aggregation Administrator's Guide for HP-UX 11i v3 December 2007

HP_APAPORT_PRIORITY
Set the port priority for the port. The port priority
determines which port in a link aggregate will be the
interface when the link aggregate is set to Hot Standby
mode (HP_APA_HOT_STANDBY=on).
The default port priority is 0.
HP_APAPORT_SYSTEM_PRIORITY
For LACP_AUTO only. Set the port system priority for the
port specified by HP_APAPORT_INTERFACE_NAME. The
system priority gives control to the system to resolve
waiting ports to be added in a link aggregate.
The default system priority is 0.
lanconfig.ascii File
Example B-1 shows a sample /etc/lanmon/lanconfig.ascii ASCII configuration file. This
file contains configuration information that LAN Monitor uses for failover groups.
96 HP APA Configuration Files