HP Auto Port Aggregation Administrator's Guide for HP-UX 11i v1 and 11i v2 September 2008

1 MANUAL mode: Can be Load Balancing or Non-Load Balancing
• Load Balancing: MAC, IP, or LB_PORT algorithm
• Non–Load Balancing: Hot Standby mode
2 For HP-UX 11.0 and 11i v1, the maximum is 4.
3 Load Balancing is configurable for outbound traffic on Ethernet links only.
4 Links must be of the same speed and type (100Base-T or 1000Base-T).
5 LACP requires full duplex (FD) operation of the links.
6 You cannot reset the speed, duplex mode, or MTU size over a link aggregate.
7 For HP-UX 11.0, the starting number is 100.
8 This is for the total of link aggregates and failover groups combined.
96 Product Specifications