HP Auto Port Aggregation Administrator's Guide for HP-UX 11i v1 and 11i v2 September 2008
.
.
-n -x -n anyLinkAggregatePPA
Displays the status for all APA capable ports using any link aggregate in the command.
For example:
Number of elements=5
[0] ppa : 1
[0] reserved2 value : -1
[0] state : 1
-p -x -p portPPA anyLinkAggregatePPA
Displays the present status of a port with the specified portPPA number. For example:
**** PORT NUMBER: 3 *******
Port FEC Mode : FEC_AUTO
Port State : UP
Port Group Capability : 901
Port Priority : 0
-q -x -q portPPA anyLinkAggregatePPA
Displays the present status of a port with the specified portPPA in the extended format.
For example:
**** PORT NUMBER: 3 *******
pagpEnabled : ENABLED
ppMyData.deviceId : 00108318b907
ppMyData.distReq : LEARNCAP_AGPORT
ppMyData.portPriority : 0
ppMyData.sentPortIfIndex : 3
ppMyData.groupCapability : 901
ppMyData.groupIfIndex : 8
ppNoPagpTimerI : 0
ppNoTransTimerQ : 0
ppTHToTATimerS : 0
ppSlowHelloTimerA : 1
ppPartnerCount : 1
++++++++ PARTNER DATA ++++++++
PARTNER 0
ppPartnerData.deviceId : 000883756600
ppPartnerData.distReq : LEARNCAP_AGPORT
ppPartnerData.portPriority : 188
ppPartnerData.sentPortIfIndex : 188
ppPartnerData.groupCapability : 3
ppPartnerData.groupIfIndex : 211
ppTimerP : 902
Port LACP Mode : 1
++++++++ PARTNER DATA ++++++++
ppAutoMode.myAutoMode : 0
ppAutoMode.yourRequest : 0
ppMySlowHello : 1
portState : PAGP_STATE_UPPAGP
portNextState : PAGP_STATE_UPPAGP
portNextEvent : PAGP_EVENT_NULL
portXmitState : PAGP_XMIT_STATE_SLOW_U6
portXmitNextState : PAGP_XMIT_STATE_SLOW_U6
portXmitNextEvent : PAGP_XMIT_EVENT_NULL
-s -x -s portPPA anyLinkAggregatePPA
Displays the system priority for an LACP_AUTO port. This has no affect on a MANUAL
or FEC_AUTO port.
56 Using the lanadmin Command