HP Auto Port Aggregation Administrator's Guide for HP-UX 11i v1 and 11i v2 September 2008

Figure 3-19 Link Aggregates Supporting HP APA
4. Choose the Network Physical Ports that Support HP APA option from the List pull-down
menu. The port configuration mode (shown in column 7 in Figure 3-20) determines the mode
for the link aggregate. In Figure 3-20, the configuration mode for the ports that support HP
APA is, by default, set to MANUAL mode. You might need to adjust the horizontal scroll
bar to see all the window's fields.
Figure 3-20 Network Physical Ports Supporting APA
5. For each port to be configured in the manual link aggregate, verify that the port's
configuration mode is set to the desired mode: MANUAL. Choose a group capability number
for each port and also for the aggregation. If changes are needed, go to the next step.
42 Configuring APA