Manualshelf

HP-UX AAA Server A.08.02.10 Administrator's Guide HP-UX 11i v3 (T1428-90093, November 2013)

ManualsBrandsHP ManualsSoftwareHP-UX AAA Server (RADIUS) Software
919293949596979899100
11 Modifying Server Properties
You can modify server variables to override built-in defaults. Server startup options override a
corresponding server property setting. You can modify server variables using the Server Properties
screen. Enter values for the given parameters to modify a server variable.
Navigating the Server Properties Screen
The Server Properties screen can be accessed by selecting the Server Properties link the Server
Manager Navigation tree. In the Server Properties screen shown in Figure 33, you can modify the
HP-UX AAA Server’s properties. Clicking on any Server Properties links in the Server Properties
screen takes you to the corresponding screen.
Figure 33 Server Manager’s Server Properties Screen
DHCP Relay Properties
Clicking the DHCP Relay Properties link takes you to the DHCP Relay Properties screen where you
can modify the properties described in Table 21.
NOTE: IPv6 support is not available for DHCP Relay.
Table 21 DHCP Relay Properties
FunctionOption
The UDP port to send DHCP requests to. If no value is specified, 67 is
used.
DHCP Server Port (optional)
The UDP port to receive DHCP responses on. If no value is specified, 67
is used.
DHCP Relay Port (optional)
Determines which attribute in the DHCP message will carry the IP address
pool name. If set to Yes, the pool name is sent in the User-Class option. If
set to No, the pool name is sent in the Vendor-Class-Identifier option.
Send User Class
The time in seconds before the initial retransmission of a request to the
DHCP server. If no value is specified, 4 is used.
Initial Retransmission Interval (optional)
The maximum value in seconds for the DHCP request retransmission interval.
If no value is specified, 60 is used.
Maximum Retransmission Interval (optional)
This value is passed to the DHCP server. The valid values are 0 (NONE)
and 1 (ETHER). If no value is specified, or any other value is entered, 1 is
used.
Client Hardware Type (optional)
94 Modifying Server Properties