HP-UX AAA Server A.08.02.10 Administrator's Guide HP-UX 11i v3 (T1428-90093, November 2013)

Table 13 Add Access Device Configuration Form Options (continued)
FunctionOption
Debug Dumps packets into the server’s debug output file.
No Check Helps enhance server performance. When this option is checked the
HP-UX AAA Server does not check all attributes to determine if the
request is a duplicate. Check this option if you know that the client sends
standard messages that can easily be detected as duplicates.
No Encaps Does not encapsulate vendor response (if the client requires
unencapsulated A-V pairs)
Old Chap For clients that perform pre-RFC CHAP.
NOTE: Dynamic Authorization Relay Port, Retry Count and Retry Interval are used only if
the HP-UX AAA Server is configured to perform client functionalities.
3. Click Create to submit the new RADIUS client to the Server Manager. Click Cancel to return
to the Access Device screen without making any changes to your server configuration.
Modifying a RADIUS Client’s Properties
To modify the properties of an existing RADIUS client, complete the following steps:
1. In the Access Device screen, click corresponding to the client whose properties you want
to edit.
The Modify Access Device screen appears similar to the one shown in Figure 19.
2. Edit the fields in the Access Device Attributes form. See Table 13 for more information on how
to fill the form.
3. Click Modify to save changes.
Click Cancel to return to the Access Devices screen without saving any changes.
Deleting a RADIUS Client
To delete a RADIUS client, complete the following steps:
1. In the Access Device screen, click the icon corresponding to the RADIUS client you want
to delete.
The Delete Access Device screen appears as shown in Figure 20. This screen allows you to
preview the access device entry before you confirm deletion.
Figure 20 The Delete Access Device Screen
2. Click Delete to delete the RADIUS client. Click Cancel to return to the Access Devices screen
without deleting the RADIUS client.
72 Configuring RADIUS Clients Using the Access Devices Screen