HP-UX AAA Server A.08.02.10 Administrator's Guide HP-UX 11i v3 (T1428-90093, November 2013)

# /opt/aaa/bin/rad_admin.sh reload group1:server1,server2
group2:server3,server4
Following is an example to retrieve the status of all the servers belonging to group1:
# /opt/aaa/bin/rad_admin.sh status group1:all
NOTE: You must save the HP-UX AAA Server attributes on the respective server to use HP-UX
AAA Server Admin tool.
Administering HP-UX AAA Servers Using Interactive User Interface
This section describes how to administer the HP-UX AAA Servers using the interactive user interface.
If none of the CLI options are specified, an interactive user interface is invoked.
To administer multiple HP-UX AAA Servers using the interactive interface, complete the following
steps:
1. Log in to the system running the HP-UX AAA Server.
2. To start the HP-UX AAA Server using the HP-UX AAA Server Admin Tool, enter the following
command at the HP-UX prompt:
# /opt/aaa/bin/rad_admin.sh
The interactive mode starts.
3. Enter the group ID.
4. Enter the HP-UX AAA Server ID.
5. Specify the operation you want to perform.
The operation starts.
NOTE: It is recommended that you use the HP-UX AAA Server Manager to manage multiple
HP-UX AAA Servers. For more information on how to perform the tasks using HP-UX AAA Server
Manager, see “Administering HP-UX AAA Servers Using HP-UX AAA Server Manager” (page 200).
Disaster Recovery of the HP-UX AAA Server Manager
The HP-UX AAA Server supports disaster recovery of HP-UX AAA Server Manager. If the host
running the HP-UX AAA Server Manager crashes due to system failure, the HP-UX AAA Server
Manager can be restored on the same or different host. You must back up a set of HP-UX AAA
Server Manager configuration files periodically and restore them on the host where you want to
launch the HP-UX AAA Server Manager.
To perform the disaster recovery of HP-UX AAA Server Manager, complete the following steps:
1. Deploy the AAA solution using HP-UX AAA Server Manager.
2. To backup the HP-UX AAA Server Manager configuration files from the host running the HP-UX
AAA Server Manager to a backup host, enter the following command at the HP-UX prompt:
1. scp /opt/hpws22/tomcat/webapps/aaa/aaalog/groups.config\
/opt/hpws22/tomcat/webapps/aaa/aaalog/AU.radhosts \
/opt/hpws22/tomcat/webapps/aaa/WEB-INF/gui.properties \
<user-account>@<backup-host>:/<backup-path>
Disaster Recovery of the HP-UX AAA Server Manager 209