HP-UX AAA Server A.08.02.10 Administrator's Guide HP-UX 11i v3 (T1428-90093, November 2013)

3. Click New Server under Servers. The Servers: Add Server page is displayed, as shown in
Figure 58.
Figure 58 Adding a Server
4. Enter the values of the server attributes. Table 61 describes the server-specific fields.
Table 61 Server Attributes
DescriptionOption
Port number to listen to authentication requests. The default Authentication port
number is 1812.
Authentication
Port number to listen to accounting requests. The default Accounting port number
is 1813.
Accounting
Specifies the UDP port number to listen for the Dynamic Authorization requests.
The default port number is 3799.
Dynamic Authorization
Port number to relay authentication requests. This option is useful when proxying
requests to a HP-UX AAA server that is not listening on the default port.
Authentication Relay
Port number to relay accounting requests. This option is useful when proxying
requests to a HP-UX AAA server that is not listening on the default port.
Accounting Relay
Specifies the local UDP port number to which the Client AATV binds to listen
for the incoming client replies. This field is optional. If no value is entered, the
HP-UX AAA Server uses any available port.
Client
Specifies the debug level. Higher levels write more information to the
radius.debug file. Increasing this value can cause performance to decline. The
default value is 0.
Debug Level
Specifies the level of information logged based on the RADIUS message type.Log Control
Empties the logfile and debug file when the server is started. This option cannot
be used with the Common Logfile option.
Reset Logfile
Managing Multiple HP-UX AAA Servers For Scalability and High-Availability 203