HP-UX AAA Server A.08.02 Administrator's Guide

7 Configuring RADIUS Clients Using the Access Devices
Screen
The server configuration must include all the clients (NASs, access points and other network devices)
that can communicate with the HP-UX AAA Server. If an access device is not included in the
configuration, the server will not handle requests from, or send requests to the client. The Access
Devices screen allows you to add a new client, and modify, or delete an existing client in the server
configuration.
Navigating the Access Devices Screen
The Access Devices screen shown in Figure 18 allows you to configure a new RADIUS client,
modify, or delete an existing RADIUS client.
Figure 18 Server Manager’s Access Device Screen
Adding a RADIUS Client
To add a RADIUS client through the Access Devices screen, complete the following steps:
1. In the Access Devices screen, click corresponding to the New Access Device list.
The Add Access Device Screen appears as shown in Figure 19.
Figure 19 Server Manager’s Access Device Attributes Screen
2. In the Access Device Attributes form, enter information according to the information in Table 13.
Table 13 Add Access Device Configuration Form Options
FunctionOption
Enter the network location of the network device. This may be an IPv4 address (in
dotted-quad notation), an IPv6 address (in colon-separated notation), or a valid DNS
Name
Navigating the Access Devices Screen 69