HP-UX AAA Server A.08.02 Administrator's Guide

AAA Server Start Options
Select the Start button’s corresponding icon to display the Start Options screen shown in
Figure 8. Table 8 describes the start options you can use.
Figure 8 Server Manager’s Start Options Screen
Table 8 Server Start Options
DescriptionOption
Specifies the UDP port number to listen to authentication requests. The default
Authentication port number is 1812.
Authentication
Specifies the UDP port number to listen to accounting requests. The default Accounting
port number is 1813.
Accounting
Specifies the UDP port number to listen for the dynamic authorization requests. The
default value is 3799.
Dynamic Authorization
Specifies the UDP port number to relay authentication requests. This option is useful
when proxying requests to a AAA server that is not listening on the default port.
Authentication Relay
Specifies the UDP port number to relay accounting requests. This option is useful when
proxying requests to a AAA server that is not listening on the default port.
Accounting Relay
Specifies the local UDP port number to which the Client AATV binds to listen for the
incoming client requests. This field is optional. If no value is entered, the HP-UX AAA
Server uses any available port.
Client
Specifies the debug level. Higher levels write more information to the radius.debug
file. Increasing this value can cause performance to decline. The default value is 0.
Debug Level
Specifies the level of information logged in the log file based on the RADIUS message
type. The Default value logs detailed information in the log file.
Log Control
Empties the logfile and debug file when the server is started.Reset Logfile
Empties stored session table at server startup.
IMPORTANT: This option is only intended for experimental use or testing and not
for a live production server. If you reset a production server, the server loses track of
the sessions that are still active.
Reset Session Table
NOTE: All options specified when the server is started are written to the server’s logfile.
IMPORTANT: Modified start options will not take effect until the server is stopped (by selecting
the stop button) and then restarted.
Starting HP-UX AAA Servers Using Server Manager 51