HP-UX AAA Server A.08.02 Administrator's Guide

• 12 (Tunnel-Link-Start)
• 13 (Tunnel-Link-Stop)
• 14 (Tunnel-Link-Reject)
• 15 (Reserved for Failed)
Acct-Delay-Time How many seconds the client has been trying to send this record,
and can be subtracted from the time of arrival on the server to
find the approximate time of the event generating this
Accounting-Request. (Network transit time is ignored.)
Acct-Input-Octets How many octets have been received from the port over the course
of this service being provided. Only appears in a stop message.
Acct-Output-Octets How many octets have been sent to the port in the course of
delivering this service. Only appears in a stop message.
Acct-Session-Id Unique Accounting ID to make it easy to match start and stop
records in a log file. The start and stop records for a given session
will have the same Acct-Session-Id. This attribute appears in all
accounting messages.
Acct-Authentic An integer that indicates how the user was authenticated, whether
by RADIUS, the NAS itself, or another remote authentication
protocol:
• 1 (RADIUS)
• 2 (Local)
• 3 (Remote)
Acct-Session-Time How many seconds the user has received a service. Only appears
in a stop message.
Acct-Input-Packets How many packets have been received from the port over the
course of this service being provided to a framed user. Only
appears in a stop message.
Acct-Output-Packets How many packets have been sent to the port in the course of
delivering this service to a framed user. Only appears in a stop
message.
Acct-Terminate-Cause How the session was terminated. The termination causes are listed
in Table 110.
Table 110 Session Termination Causes
DescriptionCause
User requested termination of service, for example with LCP Terminate or by
logging out.
User Request
DCD was dropped on the port.Lost Carrier
Service can no longer be provided; for example, user's connection to a host was
interrupted.
Lost Service
Idle timer expired.Idle Timeout
Maximum session length timer expired.Session Timeout
Administrator reset the port or session.Admin Reset
Administrator is ending service on the client, for example prior to rebooting the
client.
Admin Reboot
Client detected an error on the port that required ending the session.Port Error
414 Attribute-Value Pairs