HP-UX AAA Server A.08.02 Administrator's Guide

Table 59 Configuration Parameters of aatv.3GPP-Milenage{} Block (continued)
DescriptionParameter
If not explicitly configured, the default value is 96.
Plug-in module that supports the selection of Milenage
variant #1 or #2. A3-Variant must be 1 or 2. For
A3-Variant
information on whether an alternative SRES derivation
function is required, see “Creating Plug-ins for AATVs”
(page 334). The AKA algorithm is unaffected by this
parameter.
If not explicitly configured, the default value is 1.
NOTE: The Ci,Ri pairs must be unique. The condition, Ci=Cj and Ri =Rj is not allowed,
because i≠j. For instance, C2=C4 and R2=R4 is not allowed.
The following is an example of aatv.3GPP-Milenage block in aaa.config file:
aatv.3GPP-Milenage
{
# OP 128-bit operator-specific constant ==> CONFIGURATION
RECOMMENDED.
OP 0x00000000.00000000.00000000.00000000
# C1 128-bit computation constant ==> CONFIGURATION OPTIONAL.
C1 0x00000000.00000000.00000000.00000000
# C2 128-bit computation constant ==> CONFIGURATION OPTIONAL.
C2 0x00000000.00000000.00000000.00000001
# C3 128-bit computation constant ==> CONFIGURATION OPTIONAL.
C3 0x00000000.00000000.00000000.00000002
# C4 128-bit computation constant ==> CONFIGURATION OPTIONAL.
C4 0x00000000.00000000.00000000.00000004
# C5 128-bit computation constant ==> CONFIGURATION OPTIONAL.
C5 0x00000000.00000000.00000000.00000008
# R1 rotation constant ==> CONFIGURATION OPTIONAL.
R1 64
# R2 rotation constant ==> CONFIGURATION OPTIONAL.
R2 0
# R3 rotation constant ==> CONFIGURATION OPTIONAL.
R3 32
# R4 rotation constant ==> CONFIGURATION OPTIONAL.
R4 64
# R5 rotation constant ==> CONFIGURATION OPTIONAL.
R5 96
# A3-Variant algorithm variant ==> CONFIGURATION OPTIONAL.
A3-Variant 1
}
196 Configuring EAP-SIM and EAP-AKA Authentication Methods