HP-UX AAA Server A.08.01 administrator's guide (T1428-90072, May 2010)

Attribute-Value (A-V) pairs. See Chapter 34: “Attribute-Value Pairs” (page 546) for
information about the data format of A-V pairs in RADIUS messages.
IMPORTANT: Configuration files have a maximum input line length of 255 characters.
No checking is done to insure that a configuration statement has not exceeded this
limit. All configuration files must end with a new line.
You can track different versions of the dictionary file by adding the following line to
the file:
%DICTID Version-String
Version-String
is the version information. This string will appear in radcheck
output.
Attribute Entries
Below is the syntax of Dictionary Attribute entries:
ATTRIBUTE attribute-name integer-encoding type pruning
NOTE: Vendor-specific attribute identifier strings are defined in the vendors file
and can be used in place of the default string ATTRIBUTE. For more information, see
“Syntax of a vendors File” (page 538).
attribute-name
Replaced with the unique name of an attribute.
integer-encoding
Replaced with the actual attribute number code used in the
A-V pair data format.
type
Replaced with one of the following data types for the
attribute:
• octet: 8-bit unsigned integer value
• short: 16-bit unsigned integer value
• integer: 32 bit value in big endian order (high byte first)
• date: 32 bit value in big endian order (seconds since
00:00:00 GMT, Jan. 1, 1970)
• octets: 0-253 undistinguished octets
• a binary: 0-253 Ascend binary filter octets
• string: 0-253 octets
• vendor: 0-253 octets with octets 0-3 representing the
IANA number
• ipaddr: 4 octets in network byte order
• ipv6addr: 16 octets in network byte order (used for IPv6
attributes)
• ipv6prefix: 4-20 octets (used for IPv6 attributes)
• ifid: 8 undistinguished octets (used for IPv6 attributes)
532 Configuration Files