HP-UX AAA Server A.08.01 administrator's guide (T1428-90072, May 2010)

Table 30-1 Common Problems with the Server Manager (continued)
SolutionCauseProblem
Tomcat is not IPv6 enabled.Can launch the Server Manager,
but cannot start, stop, load or save
1. Stop tomcat.
2. Execute the following
command:
export
JAVA_OPTS=”$JAVA_OPTS \
-Djava.net.preferIPv4Stack=false”
or view statistics of the HP-UX
AAA Servers configured with a
IPv6 address in the ‘Domain Name
or IP address field’.
3. If you get this error after
executing the above command:
“JAVA_OPTS: Parameter not
set” then execute the
following command,
export
JAVA_OPTS=”-Djava.net.preferIPv4Stack=false”
Otherwise skip this step.
4. Start Tomcat.
The RMI object is not running. 1. Verify that the RMI object is
running. If not, start the RMI
object.
2. Ensure that port 2099 is used
by the Java process using the
following command:
# lsof –i:2099
Port 2099 must be in the
LISTEN state and used by a
Java process
3. Ensure that the shared secret
for rmi.config.secret is
the same on the HP-UX AAA
Server and the system running
the Server Manager.
For more information, see
“Troubleshooting Remote
Management Problems”
Server is configured with invalid
values for Server Attributes,
Can launch the Server Manager,
but cannot start the server. Starting
1. Verify that the RMI object is
running. If not, start the RMI
object.such as the combination of the
Listen IP Address and
the server fails with either of the
following messages “Address
2. Modify the configured Server
Attributes which is failing to
Administration Port values of
the server is already in use by
already in use” (OR) “Can’t assign
requested address.”
start using HP-UX AAA Server
Manager.
another server, host names or
addresses specified in the
For more information, see
“Administering HP-UX AAA
‘Domain Name or IP Address’
and ‘Listen IP Address’ do not
474 Troubleshooting Procedures