HP-UX AAA Server A.08.01 administrator's guide (T1428-90072, May 2010)

6. Enter the following values in the respective fields, within the Client Action
Properties window:
Action Name: Disconnect
Timer Value: 1
Max Requests: 0
9. To enable the CoA functionality, complete the following steps:
NOTE: You must complete this procedure only if you want the CoA functionality.
Otherwise, you can ignore this procedure.
1. Log in to HP-UX AAA Server Manager.
2. Click Server Properties.
3. Click AAA Server as a Client Properties.
4. Click Client Action Properties.
5. Select New Action.
6. Enter the following values in the respective fields, within the Client Action
Properties window:
Name: COA
Timer Value: 60
Max Requests: 0
10. To activate the changes, restart the HP-UX AAA Server.
Dynamic Authorization in Authorize Only Mode
To ensure simplicity of translation between RADIUS and DIAMETER, RFC 5176
describes a different sequence of message exchanges between the HP-UX AAA Server
and the NAS for Disconnect and CoA. Figure 20-13 illustrates dynamic authorization
in authorize only mode.
Figure 20-13 Dynamic Authorization in Authorize Only Mode
The sequence of steps involved in the message exchange is as follows:
1. The HP-UX AAA Server sends a CoA-Request that includes the Service-Type
attribute. The value of attribute is Authorize Only. Therefore, the mode is called
316 Configuring the HP-UX AAA Server for Dynamic Authorization