HP-UX AAA Server A.08.01 administrator's guide (T1428-90072, May 2010)

Table 17-20 Configuration Parameters of aatv.3GPP-Milenage{} Block (continued)
DescriptionParameter
warning message in the logfile. Milenage
specifies the default value.
If not explicitly configured, the default value is
0x00000000.00000000.00000000.00000002.
128-bit computation constant. C4 must have odd
parity. Use of a value with even parity generates a
C4
warning message in the logfile. Milenage
specifies the default value.
If not explicitly configured, the default value is
0x00000000.00000000.00000000.00000004.
128-bit computation constant. C5 must have odd
parity. Use of a value with even parity generates a
C5
warning message in the logfile. Milenage
specifies the default value.
If not explicitly configured, the default value is
0x00000000.00000000.00000000.00000008.
Rotation constant. The valid range is 0 to 127.
Milenage specifies the default value.
R1
If not explicitly configured, the default value is 64.
Rotation constant. The valid range is 0 to 127.
Milenage specifies the default value.
R2
If not explicitly configured, the default value is 0.
Rotation constant. The valid range is 0 to 127.
Milenage specifies the default value.
R3
If not explicitly configured, the default value is 32.
Rotation constant. The valid range is 0 to 127.
Milenage specifies the default value.
R4
If not explicitly configured, the default value is 64.
Rotation constant. The valid range is 0 to 127.
Milenage specifies the default value.
R5
If not explicitly configured, the default value is 96.
Plug-in module that supports the selection of
Milenage variant #1 or #2. A3-Variant must be 1
A3-Variant
or 2. For information on whether an alternative
SRES derivation function is required, see “Creating
Plug-ins for AATVs” (page 454). The AKA algorithm
is unaffected by this parameter.
If not explicitly configured, the default value is 1.
Generating Authentication Vectors Using A3, A8, and AKA Algorithms 271